This section contains command line interface (CLI) commands needed to manage the configuration files, as well as other file management
commands.
Topics:
•
boot system
•
cd
•
copy
•
delete
•
dir
•
format
•
fsck flash
•
mkdir
•
mount nfs
•
rmdir
•
upgrade system
•
rename
•
show boot system
•
show bootvar
•
show file-systems
•
show os-version
•
show running-config
•
show startup-config
•
show version
•
upgrade boot
•
verify
boot system
Specify the location where the Dell Networking OS image used to boot the system is stored.
Syntax
boot system {gateway ip-address | stack-unit {stack-unit-number | all} {default
| primary | secondary} {ftp: | nfsmount: | system: {A: | B: | bmp-boot} | tftp:
| usbflash:}}
To return to the default boot sequence, use the no boot system command.
Parameters
gateway
ip-address
stack-unit
58
File Management
Enter the IP address of the default next-hop gateway for the management subnet.
Enter an IP address in dotted decimal format.
Enter the keywords stack-unit to specify the stack unit number.
File Management
3