Configuring Authorization Methods For An Isp Domain - HP VSR1000 Security Configuration Manual

role authentication. The variable n has the same value as the variable n in the target user role
level-n.
Configuration procedure
To configure authentication methods for an ISP domain:
Step
1. Enter system view.
2. Enter ISP domain view.
3. Specify the default
authentication method for
all types of users.
4. Specify the authentication
method for login users.
5. Specify the authentication
method for portal users.
6. Specify the authentication
method for PPP users.
7. Specify the user role
authentication method.

Configuring authorization methods for an ISP domain

Configuration prerequisites
Before configuring authorization methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
authorization scheme for each access type and service type.
2. Determine whether to configure the default authorization method for all access types or service
types. The default authorization method applies to all access users. However, the method has a
lower priority than the authorization method that is specified for an access type or service type.
Command
system-view
domain isp-name
authentication default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
ldap-scheme ldap-scheme-name [ local ]
[ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
authentication login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
ldap-scheme ldap-scheme-name [ local ]
[ none ] | local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
authentication portal { ldap-scheme
ldap-scheme-name [ local ] [ none ] | local
[ none ] | none | radius-scheme
radius-scheme-name [ local ] [ none ] }
authentication ppp { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] | local
[ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
authentication super { hwtacacs-scheme
hwtacacs-scheme-name | radius-scheme
radius-scheme-name } *
46
Remarks
N/A
N/A
By default, the default
authentication method is
local.
The none keyword is not
supported in FIPS mode.
By default, the default
authentication method is
used for login users.
The none keyword is not
supported in FIPS mode.
By default, the default
authentication method is
used for portal users.
The none keyword is not
supported in FIPS mode.
By default, the default
authentication method is
used for PPP users.
The none keyword is not
supported in FIPS mode.
By default, the default
authentication method is
used for user role
authentication.