NEC Univerge sv8500 Manual page 1488

Δ
33. SET VLAN
This command is used to specify the settings for VLAN.To make this assignment effective, it is required
to execute the "SAVE" command and to restart before exiting the maintenance command. In MG, one
VLAN can be created per network.
MG-PRI(SIP)>SET VLAN
Please enter a parameter.
VLAN ID (1-4094):1
COS (0-7):0
VLAN setting succeeded.
Δ
34. SET WARNING_TONE
MG-PRI(SIP)>SET WARNING_TONE P1
Warning Tone Control setting succeeded.
Δ
P1
VOL.2-1235
MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
1) Specify VLAN ID
1-4094=VLAN ID
2) Specify COS
0-7=COS
Result is displayed.
P1-Specify a set value (Default: 0)
No Warning Tone
0=
Not used
1=
Not used
2=
3= Send Warning Tone
Result is displayed.