[4] Security Data Assignment
STEP 1: ASECL (Assignment of Security Data for LDM)
Assign one-time password and its available period.
One-Time Password: Enter one-time password. [4-10 digits]
Available Period:
To perform authentication feature, assign the same one-time password on MG-T1(SIP) by configuration
Note:
command. At initial startup, MG-T1(SIP) will ask you to input the one-time password for authentication.
RESTART MG-T1(SIP) BY TURNING OFF AND ON THE POWER AFTER ASSIGNING DATA.
[*] Data Deletion
Deletion must be operated in the reverse order of assignment. Make sure to delete in the order AMGIL
ATRK. Confirm there is no data left in AMGIL before deleting ATRK.
Specify the available period of one-time password.
VOL.2-1276
MG-T1(SIP) [SCA-24DTIA]
→