NEC Univerge sv8500 Manual page 1561

[Help]
During the maintenance command program is activated, it also provides help function for referring to available
command and sub command. After a prompt is indicated, request to list up the target help by inputting "?",
"command name + ?", or "command name + sub command name + ?" after the prompt, and press the Enter key.
The example below shows the screen when executing help function regarding "set" and "set ipaddress."
MG-T1(SIP)>set ?
DEFAULTROUTE
DHCP
DNS_SW
:
:
MG-T1(SIP)>set ipaddress ?
xxx.xxx.xxx.xxx IP Address
MG-T1(SIP)>set ipaddress 10.41.204.180 ?
xxx.xxx.xxx.xxx Subnetmask
MG-T1(SIP)>
[History]
In the command line of maintenance command, cursor key UP and DOWN operation shows history function.
You can edit the input parameters using Back Space key and change the parameter.
Setting Default Gateway
Setting DHCP
Setting DNS
VOL.2-1308
MG-T1(SIP) [SCA-24DTIA]