NEC Univerge sv8500 Manual page 1407

MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
STEP 3: ARTI (Assignment of Trunk Application Data)
Assign the application data for Trunk in Virtual Speech Channel.
RT=10 (Virtual Signaling Channel)
RT=20 (Virtual Speech Channel)
CDN68 (VIR): 2 (MG connection)
CDN89 (REGION): 1 = ETSI ISDN *Required for EMEA
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
Note:
VS-32.
To use FAX, specify the FAX relay settings in the following:
CDN71 (FXD)
CDN72 (FXJS)
CDN73 (FXPT)
CDN74 (FXPS): This parameter appears when 1 (G.711) or 2 (G.726) is selected in FXPT.
VOL.2-1154