NEC Univerge sv8500 Manual page 1556

Hide thumbs Also See for Univerge sv8500:

Table of Contents

Select Specify Terminal Type in How to Specify Terminal, and then select MG-T1[SIP].

Click the Search button.

After the MG-T1(SIP)s are displayed in Result of Search, select the appropriate MG-T1(SIP)

to be upgraded the firmware.

Click the Close button to back to the main screen.

Click the Exe button to upgrade the firmware to the target MG-T1(SIP)s.

"Upgrade is succeeded" is displayed. Note that version information in the screen is not up-

dated at this time. If the upgrade is failed, click the Close button, and then go back to STEP 3.

After upgrade is completed, click the Close button. In the main screen, click the Exit button

to close the ATDL command.

To confirm the firmware, activate the DIPI command.

The file name is indicated in the following:

Select Media Converter in Functionality Type, and then click the Execute button.

Confirm that the firmwares in the appropriate ones are upgraded.

To confirm MG-T1(SIP) is properly operating with the upgraded firmware, make a call to the

MG-T1(SIP). Check that you can hear RBT.

Receive a call via the MG-T1(SIP), and confirm that you can talk to each other.

After all the tasks are completed, write down/label the firmware version in the back of the

MG-T1(SIP). For example, 2A is indicated for Version 2. 3A is indicated for Version 3.

ISSUE NUMBER

MG-T1(SIP) [SCA-24DTIA]

Show Quick Links

Table of Contents