NEC Univerge sv8500 Manual page 1680

SIP register IP Address
SIP register Port Number
SIP register Expires time
-------------------------------------------------
set keynumber:
Keynumber
-------------------------------------------------
set auth:
User ID
Password
-------------------------------------------------
Does it display more? Y/N=y
-------------------------------------------------
set privacy_pattern:
Privacy pattern
-------------------------------------------------
set session_timer:
:0.0.0.0
:5060
:3600sec
:0
:0
:0
:DisplayName
VOL.2-1427
MG-SIP128 [MG-128SIPMGG]
Displays the current setting of the
SIP register IP Address.
When IPv6 (=1) is selected by "set
ip_version" command, this IP
address will be shown in IPv6
address format.
After displaying about 20 lines of
config data, you can select if you
want to see more data or not.
To see the config data more, enter
"y". To exit this command, press
"n".
When "DisplayName" is selected
by the SET command
"privacy_pattern", "Display-
Name" is shown. When RFC3325
Pattern (0) is selected, "RFC3323/
3325 (0)" is shown. When Pattern
(1) is selected, "RFC3323/3325
(1)" is shown. When Pattern (6) is
selected, "RFC3325 (SIP-URI (no
privacy))" is shown.