NEC Univerge sv8500 Manual page 1564

Input new Host Name: mgt1.nec.com
Setting Default Gateway IP address:
--- Default Gateway IP Address set ---
Current Default Gateway: 0.0.0.0
Change Default Gateway? [Y (change)/N (current)/
Q(quit)]: y
Input new Default Gateway: 10.41.1.254
Setting IP address, port number, and host name of SIP server:
--- SIP Server IP Address & Host Name set ---
Current SIP Server/IP Address/Port Number/Host Name:
SIP Server IP Address
1 0.0.0.0
2 0.0.0.0
: :
: :
19 0.0.0.0
20 0.0.0.0
Change SIP Server Information? [Y (change)/N (cur-
rent)/Q(quit)]: y
Input new SIP Server (1-20): 1
Input new IP Address: 10.41.1.200
Input new Port Number: 5060
Is there the Host Name? [Y/N]: y
Input new Host Name: SVR1.nec.com
Port Number Host Name
5060
5060
:
:
5060
5060
VOL.2-1311
MG-T1(SIP) [SCA-24DTIA]
Enter new host name of MG-T1(SIP) in full-
domain format.
e.g. mgt1.nec.com
(*Up to 63 bytes of alphanumeric characters,
. (period), and - (hyphen) is available.)
The current setting is displayed.
Asked whether to change the displayed set-
ting.
Y: Change the setting
N: Remain the current setting
Q: Exit this setting
Enter the IP address of the default gateway.
e.g. 10.41.1.254
(*Note that default gateway should be located
in the same segment with MG-T1(SIP).)
The current setting of the Telephony Server
information (IP address, port number, and host
name) is displayed.
Asked whether to change the displayed setting.
Y: Change the setting
N: Remain the current setting
Q: Exit this setting
Enter the number of SIP server [1-20].
Enter the IP address of SIP server. Note 1
e.g. 10.41.1.200
Enter the port number of SIP server.
Default: 5060
Asked whether to use host name.
Y: Use host name
N: Do not use host name
Enter the host name of SIP server in full-domain
format.
e.g. SVR1.nec.com
(*Up to 63 bytes of alphanumeric characters, .
(period), and - (hyphen) is available.)