NEC Univerge sv8500 Manual page 1677

-------------------------------------------------
set call_hold:
Call Hold function
RTP detect timer value
Response code to reject
-------------------------------------------------
set name_display :
Name Display
-------------------------------------------------
set ip_version :
IP Version
-------------------------------------------------
set country_code :
Country Code
-------------------------------------------------
set softdsp:
codec convert mode
PAD setting
PAD reception(voice)
PAD transmission(voice)
PAD reception(FAX)
PAD transmission(FAX)
-------------------------------------------------
[Port configuration data]
MG(SIP)> show config
[2012-05-05 14:49:29]
[SP-4051:01.00.00.00]
:enable
:3sec
:488
: enable
: IPv4
: 1 (JP)
:PCMU
:local setting
:-20
:20
:-20
:20
VOL.2-1424
MG-SIP128 [MG-128SIPMGG]
Displays the current setting of MG
based call retention. When "dis-
able" is selected by a SET com-
mand "call_hold", "disable" is
displayed, but "RTP detect timer
value" and "Response code to
reject" are not displayed.
Displays the current setting of
Name Display service.
Displays the current setting of the
IP version.
Displays the current setting of
Country Code.
Displays the current settings of
codec conversion and PAD value.
Note 5
Time when the configuration is
acquired.
Software version information of
MG-SIP128 [MG-128SIPMGG]