NEC Univerge sv8500 Manual page 1602

Input:1
Input Fully Qualified Domain Name.(default=0,
MAX63(strings))
Input SIP server Port Number.
(1024-65535 (default=5060)):5060
Select SIP server Router type.
0=Strict(default)
1=Loose
Input:0
Input Domain Name.(default=0,
MAX128(strings))
Note:
• Pressing the Enter key can skip the item. Make sure to input data for "SIP server type" and "IPAddress/
FQDN"; these cannot be skipped.
• To make this assignment effective, it is required to execute the "REBOOT" command to save the configura-
tion and restart the MG-SIP128 [MG-128SIPMGG].
• If you have set a character string to specify the service provider, the character string is used as the SIP do-
main name.
• Be sure not to enter a blank character to the end of the FQDN (with the Copy and Paste features of your
personal computer), and be careful not to mistype a character. ("0"(zero) or "O" (alphabetical O), for ex-
ample.)
17.3.5 Setting of Pilot Number for MG-SIP128 [MG-128SIPMGG]
Assign a pilot number of MG-SIP128 [MG-128SIPMGG], which is used to register to the SIP server.
[Display example]
MG(SIP)> set keynumber
Input Keynumber.(default=0, MAX32(strings))
:0
Note:
• Pressing the Enter key can skip the item.
• To make this assignment effective, it is required to execute the "REBOOT" command to save the configura-
tion and restart the MG-SIP128 [MG-128SIPMGG].
:
VOL.2-1349
MG-SIP128 [MG-128SIPMGG]
Select FQDN (=1).
Assign the FQDN of the proxy server in
maximum of 63 characters (Default: 0).
Assign the port number of the proxy
server (Default: 5060)
Select a Strict router or Loose router for
the proxy server (Default: 0).
0: Strict router
1: Loose router
Select "0".
Input a string that specifies the service
provider in maximum of 128 characters.
Assign the pilot number used by MG-
SIP128 [MG-128SIPMGG] to register.
(Default: 0).