NEC Univerge sv8500 Manual page 1585

REBOOT COMMAND
1. REBOOT
This command is used to reboot the MG-T1(SIP).
MG-T1(SIP)>REBOOT
Do you need reboot? [Y/N]: Y
EXIT COMMAND
1. EXIT
This command is used to exit the program.
• Normal operation:
MG-T1(SIP)>EXIT
->
• When configuration data is changed, the following is displayed according to the changed data:
MG-T1(SIP)>EXIT
Configuration data was changed.
** Don't power off in progress **
y: Save and Exit.
n: Exit without saving.
c: Cancel
[y/n/c]: y
Configuration data has been saved.
If EXIT command is executed at OS(MG) prompt, any key entry will not be effective. In this case, press
Note:
Ctrl+C keys together to display OS prompts.
Y=Reboot
N=Not reboot
Returns to OS prompt.
y=Save the file and exit the program
n=Exit the command without saving
c=Cancel the command
Enter "y" to save the changed data and exit the configu-
ration command.
Result is displayed.
VOL.2-1332
MG-T1(SIP) [SCA-24DTIA]