NEC Univerge sv8500 Manual page 1662

Input Domain Name.(default=0,
MAX128(strings))
[IPv4]
MG(SIP) > set sip_server
Select SIP server type.
0=IPAddress(default)
1=FQDN
Input:0
Input SIP server IP Address.
(default=0.0.0.0)
:192.168.100.100
Input SIP server Port Number.
(1024-65535(default=5060)):5060
Select SIP server Router type.
0=Strict(default)
1=Loose
Input:0
Select the setting of rport(RFC3581)
function.
0=disable (default)
1=enable
Input: 0
Input Domain Name.(default=0,
MAX128(strings))
When FQDN (=1) is selected:
MG(SIP) > set sip_server
Select SIP server type.
0=IPAddress(default)
1=FQDN
Input:1
VOL.2-1409
MG-SIP128 [MG-128SIPMGG]
Input a string that specifies the service
provider in maximum of 128 charac-
ters.
When IP address (=0) is selected.
(Default: 0)
Assign the IP address of the proxy
server
(Default: 0.0.0.0).
Assign the port number of the proxy
server
(Default: 5060)
Select a Strict router or Loose router for
the proxy server
(Default: 0)
0: Strict router
1: Loose router
Select "0".
Enable/disable the rport (RFC3581)
function.
(Default: 0)
Input a string that specifies the service
provider in maximum of 128 charac-
ters.
When FQDN (=1) is selected.