Table of Contents
Advertisement
General Power Meter Functions
2
If you measure a signal with a frequency outside the frequency range defined in
NOTE
the frequency dependent offset table, the power meter uses the highest or lowest
frequency point in the frequency dependent offset table to calculate the offset
Selectable Frequency Dependent Offset Unit (dB or %)
The offset in dB range is from –100 dB to +100 dB.
The equivalent range in % is from 0.0000000001% to 10000000000%.
Once the offset unit is selected, it will be applied to all the offsets in the selected
table and also to the remaining nine tables.
To change the offset unit to dB, press
,
, and
.
1 of 2 Offset Unit
dB
To change the offset unit to %, press
,
, and
.
1 of 2 Offset Unit
%
Keysight N1913/1914A User's Guide
71
Advertisement
Table of Contents
