Show Protocol-Queue-Mapping - Dell Z9500 Command Reference Manual

show protocol-queue-mapping

Display the Z9500 protocol-queue mapping for each configured protocol.
Z9500
Syntax
show protocol-queue-mapping [queue-id queue-number]
Parameters
queue-id
queue-number
Defaults Not configured.
Command EXEC Privilege
Modes
Usage
The show output displays information on CPU traffic flows for all protocols,
Information
including the ingress queue at which the traffic is queued and the CPU to which
protocol traffic is sent with the applied rate limits (configured or default) in kilobits
per second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route
Processor), CP (Control Processor), and LC (line card).
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
Example
Dell# show protocol-queue-mapping
CommitBurst PeakBurst
Protocol
(kbps)
--------
---------
STP
150
LLDP
500
PVST
200
LACP
500
ARP
600
Control Plane Policing (CoPP)
(Optional) Display the protocol-queue mapping for a
specified control-plane queue. The range of CPU queue
numbers is from 0 to 23.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Queue
(kb) (kb)
-----
-------
Q15
1000 1000
Q7
1000 1000
Q14
1000 1000
Q15
1000 1000
Q2/Q10/Q3/Q11 CP/RP
1000 1000
CommitRate Peak Rate
EgPort (kbps)
------ --------
RP 150
CP 500
RP 200
RP 500
600
-------
603