Display Ntp-Service Trace - H3C SR6600 Command Reference Manual

Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 13 Command output
Field
Clock status
Clock stratum
Reference clock ID
Nominal frequency
Actual frequency
Clock precision
Clock offset
Root delay
Root dispersion
Peer dispersion
Reference time

display ntp-service trace

Use display ntp-service trace to view brief information about each NTP server from the local device back
to the primary reference source.
Syntax
display ntp-service trace [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Description
Status of the system clock:
•
Synchronized—The system clock has been synchronized.
•
Unsynchronized—The system clock has not been
synchronized.
Stratum level of the system clock.
When the system clock is synchronized to a remote time server,
this field indicates the address of the remote time server. When
the system clock is synchronized to a local reference source, this
field indicates the address of the local clock source:
•
When the local clock has a stratum level of 1, the value of this
field is LOCL.
•
When the stratum of the local clock has another value, the
value of this field is the IP address of the local clock.
Nominal frequency of the local system hardware clock, in Hz.
Actual frequency of the local system hardware clock, in Hz.
Precision of the system clock.
Offset of the system clock relative to the reference source, in
milliseconds.
Roundtrip delay from the local device to the primary reference
source, in milliseconds.
Maximum error of the system clock relative to the primary
reference source, in milliseconds.
Maximum error of the system clock relative to the reference
source, in milliseconds.
Reference timestamp.
74