Table of Contents
Advertisement
RMON C
OMMANDS
SHOW RMON STATISTICS
show rmon statistics
Overview
Use this command to display the current values of the statistics for all the RMON
statistics collections currently defined on the device.
NOTE
Syntax
show rmon statistics
Mode
User Exec and Privileged Exec
Example
To display the current values of the statistics for all the RMON statistics collections,
us the commands:
awplus#
Output
Figure 57-3: Example output from the show rmon statistics command
awplus#show rmon statistics
rmon collection index 45
stats->ifindex = 4501
input packets 1279340, bytes 85858960, dropped 00, multicast packets 1272100
output packets 7306090, bytes 268724, multicast packets 7305660 broadcast
packets 290
rmon collection index 679
stats->ifindex = 5013
input packets 00, bytes 00, dropped 00, multicast packets 00
output packets 8554550, bytes 26777324, multicast packets 8546690 broadcast
packets 7720
NOTE
interfaces:
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A
: Only statistics for switch port interfaces, not for VLAN interfaces, can be shown.
show rmon statistics
: The following etherStats counters are not currently available for Layer 3
etherStatsBroadcastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2391
Advertisement
Table of Contents
