Clock Set - Allied Telesis x310-26FT Command Reference Manual

S C M
YSTEM ONFIGURATION AND

CLOCK SET

clock set
Overview This command sets the time and date for the system clock.
clock set <hh:mm:ss> <day> <month> <year>
Syntax
Mode Privileged Exec
Usage Configure the timezone before setting the local time. Otherwise, when you change
the timezone, the device applies the new offset to the local time.
NOTE
date using this command. NTP maintains the clock automatically using an external
time source. If you wish to manually alter the time or date, you must first disable NTP.
Example To set the time and date on your system to 2pm on the 2nd of April 2007, use the
command:
awplus#
Related clock timezone
Commands
C613-50103-01 REV A
C
ONITORING OMMANDS
Parameter Description
<hh:mm:ss>
Local time in 24-hour format
<day>
Day of the current month <1-31>
<month>
The first three letters of the current month.
<year>
Current year <2000-2035>
: If Network Time Protocol (NTP) is enabled, then you cannot change the time or
clock set 14:00:00 2 apr 2007
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
217