Chapter 11
RADIUS Authentication Server
Commands
"ADD RADIUSSERVER SERVER"
on page 180
"DELETE RADIUSSERVER
SERVER" on page 181
"DISABLE
RADIUSACCOUNTING" on
page 182
"ENABLE
RADIUSACCOUNTING" on
page 183
"SET AUTHENTICATION" on
page 184
"SET RADIUS" on page 185
"SET RADIUSACCOUNTING" on
page 186
"SHOW AUTHENTICATION" on
page 188
"SHOW RADIUS" on page 190
"SHOW RADIUSACCOUNTING"
on page 191
Section II: Switch Management
The RADIUS server commands are summarized in Table 24.
Table 24. RADIUS Server Commands
Command
AT-GS900M Series CLI Reference
Description
Adds a RADIUS server to the list.
Deletes the RADIUS server from the list.
Disables the accounting feature on
RADIUS servers.
Enables the accounting feature on
RADIUS servers.
Specifies the settings of RADIUS servers
for authentication.
Specifies the settings of RADIUS servers
for authentication.
Specifies the settings of RADIUS servers
for accounting.
Displays a list of RADIUS servers and
their settings.
Displays a list of RADIUS servers and
their settings.
Displays the settings of RADIUS servers
for accounting.
179