Multicast Group Port Limit - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
multicast group port limit
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
multicast group port interfaceSpecifier limit groupLimit
no multicast group port interfaceSpecifier limit
Command introduced before JunosE Release 7.1.0.
Limits the number of IGMP or MLD groups that a port can accept. The no version restores
the default situation, in which there is no limit to the number of IGMP or MLD groups the
port can accept.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
groupLimit—Maximum number of IGMP or MLD groups that an interface can accept in
the range 0–64,000
Global Configuration
Chapter 13: M Commands
1431
Advertisement
Table of Contents
