Mru - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
mru
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mru mruSize
no mru
Command introduced before JunosE Release 7.1.0.
Sets the maximum allowable size in bytes of the maximum receive unit for interfaces on
cOCx/STMx, COCX-F3, CT3, and POS modules. The no version restores the default value,
which varies according to module type.
mruSize—Maximum allowable size of the MRU; default and range varies with module
type:
Interfaces on cOCx/STMx, CT3, and COCX-F3 modules—Number in the range
4–9996; default value is 1600
Interfaces on POS modules—Number in the range 1–9996; default value is 4470
Interface Configuration
Chapter 13: M Commands
1427
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers