7.2 Service
7.2 Service
�
WARNING! Always turn off the power switch and unplug the power cord
when servicing the device. Contact with internal components or other
components connected to the line power can cause severe shock hazard.
Perform only service procedures that are described in the manual or
authorized by Thermo Fisher Scientific Service Department service
personnel.
7.2.1 Replacing Tubing
The Thermo Scientific Matrix PlateMate 2x3 is designed with Easy-Load
peristaltic pumps and quick-disconnect fittings to easily replace Reagent tubing,
Tip Wash Inlet and Waste Outlet lines.
The Thermo Scientific Matrix PlateMate 2x3 uses two basic fluid systems:
Reagent fill
Tip Wash
The sections that follow describe tubing replacement for each fluid system.
User Manual
®
117