Trace Gc Ultra Rear Panel - Thermo Scientific TRACE GC Ultra Installation Manual

Getting Started
Remove the GC Rear Panel
1. Locate the six Allen screws that secure the rear panel to the GC. Remove
2. Carefully remove the rear panel of the GC. Be aware that the cooling fan is
NOTE Pay attention to the positioning of the cooling fan plug, so it can be reconnected in the
same way it was removed.
Installation Guide
1
Figure 1-3. TRACE GC Ultra Rear Panel
these screws using the 2-mm Allen wrench. See Figure 1-5.
attached to the rear panel.
1. Right Panel Securing Screw
Upgrade Kit
Nitrogen Phosphorus Detector
11