Subaru IMPREZA GD 2007 Series Manual page 3786

asieps_tobira_IM_US.book 21 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Front Hood Grille
A: REMOVAL
1) Open the front hood.
2) Remove the intercooler water spray hose. (STI
model)
3) Remove seven screws and clip (A) to remove
the front hood duct.
4) Loosen the six nuts (B), remove the four clips
(A), then remove the front hood grille.
(A)
(A)
Front Hood Grille
(A)
EI-01393
(B) (A)
(A)
EI-01394
EI-21
EXTERIOR/INTERIOR TRIM
B: INSTALLATION
1) Replace all four clips.
2) Tighten the four clips of the front hood grille to
the front hood panel.
CAUTION:
Make sure that the anchor portion of each clip
is firmly engaged.
3) Install the six nuts.
Tightening torque:
4.5 N·m (0.46 kgf-m, 3.32 ft-lb)
4) Hook the two front hood duct hooks (A) to the
holes on the front hood.
(A)
EI-00446
EI-01395
EI-01396
EI-00449