Subaru IMPREZA GD 2007 Series Manual page 3790

asieps_tobira_IM_US.book 25 ページ ２０１２年１月１７日 火曜日 午後３時４８分
11) Loosen the bolts and nuts to remove the
bumper beam from the vehicle body.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Match the front bumper attachment holes to the
slider (A) claws to attach.
(A)
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to EI-4, FRONT BUMPER, COM-
PONENT, General Description.>
Front Bumper
EI-01403
EI-01404
EI-25
EXTERIOR/INTERIOR TRIM