Subaru IMPREZA GD 2007 Series Manual page 3797

asieps_tobira_IM_US.book 32 ページ ２０１２年１月１７日 火曜日 午後３時４８分
EXTERIOR/INTERIOR TRIM
11) Remove the three bolts, and remove the
bumper beam.
NOTE:
For the right side, removing the canister, loosen the
bolt, then remove the bumper beam.
12) Remove the five clips, and remove the bumper
upper beam.
13) Remove the license plate light.
14) Remove the six clips, and remove the bumper
side cover.
Rear Bumper
15) Remove the upper brackets from vehicle body.
2. SEDAN MODEL
The following is the instructions for removing the
rear bumper on the wagon model. <Ref. to EI-31,
EI-00353
WAGON MODEL, REMOVAL, Rear Bumper.>
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to EI-5, REAR BUMPER, COMPO-
NENT, General Description.>
C: REPAIR
Refer to front bumper repair. <Ref. to EI-26, RE-
PAIR, Front Bumper.>
EI-00412
EI-00472
EI-01452
EI-32
EI-00473