Show Interfaces Port-Channel - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
console(config)# port-channel load-balance src-dst-mac-ip
console(config)# port-channel load-balance src-dst-mac-ip-port
console(config)#

show interfaces port-channel

Use the show interfaces port-channel EXEC mode command to display port-
channel information for all port channels or for a specific port channel.
Syntax
show interfaces port-channel
Parameters
interface-id—Specify an interface ID. The interface ID must be a Port
Channel.
Command Mode
EXEC mode
Example
The following example displays information on all port-channels.
console#
console# show interfaces port-channel
Load balancing: src-dst-mac.
Gathering information...
Channel Ports
------- -----
Po1 Active:
Po2 Active:
Po3
console# show interfaces switchport gi1/0/10
Gathering information...
Name: gi1/0/10
Switchport: enable
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\Port_Channel.fm
[interface-id]
gi1/0/
1,Inactive:
gi1/0/
25 Inactive:
gi1/0/
2-3
gi1/0/
24
Port Channel Commands
385