Clear Gvrp Statistics - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

simply rely on GVRP for VLAN updates. But if the local bridge needs to know only how to reach a given VLAN,

then GVRP provides all necessary information.

The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. The

GVRP dynamic updates are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP is

disabled, the system deletes all VLAN interfaces that were learned through GVRP and leaves unchanged all

VLANs that were manually configured.

clear gvrp statistics

Clear GVRP statistics on an interface.

C-Series, E-Series, S-Series, Z-Series, S4810

clear gvrp statistics interface interface

Command Modes

Command History

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

show gvrp statistics

Enter the following keywords and slot/port or number information:

For a Fast Ethernet interface, enter the keyword

FastEthernet followed by the slot/port information.

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet followed by the slot/port information.

For a Port Channel interface, enter the keywords port-

channel followed by a number. For the C-Series and S-

Series, the range is 1 to 128. For the E-Series, the range is 1 to

255 for TeraScale and 1 to 512 for ExaScale.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet followed by the slot/port

information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE followed by the slot/port information.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on C-Series, E-Series, and S-Series

– displays the GVRP statistics.