Clear Gvrp Statistics - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

VLANs created dynamically with GVRP exist only as long as a GVRP-enabled device is sending

updates. If the devices no longer send updates, or GVRP is disabled, or the system is rebooted, all

dynamic VLANs are removed.

GVRP manages the active topology, not non-topological data such as VLAN protocols. If a local

bridge must classify and analyze packets by VLAN protocols, manually configure protocol-based

VLANs, and simply rely on GVRP for VLAN updates. But if the local bridge must know only how to

reach a given VLAN, then GVRP provides all necessary information.

The VLAN topologies that GVRP learns are treated differently from VLANs that are statically

configured. The GVRP dynamic updates are not saved in NVRAM, while static updates are saved in

NVRAM. When GVRP is disabled, the system deletes all VLAN interfaces that were learned through

GVRP and leaves unchanged all VLANs that were manually configured.

clear gvrp statistics

Clear GVRP statistics on an interface.

clear gvrp statistics interface interface

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Enter the following keywords and slot/port or number

information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

Introduced on the S6000–ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

GARP VLAN Registration (GVRP)