Parts Configuration - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Image Formation System > Overview > Parts Configuration
● Charging Specifications
Primary Charging
High Voltage PCB
(PCB11)
Grid Wire
Photosensitive Drum
Separation Claw
Pre-transfer Charging Wire
Item Bias value
Primary charging DC bias 6000 to 9000
bias V
Grid bias DC bias 530 to 800 V To be specified by the estimated life and environment*
Developing bias AC bias 1200 V
DC bias 200 to 300 V To be specified by the estimated life and environment*
Dust-collection bias DC bias -800 V
Pre-transfer AC bias 8300 V
charging bias
DC bias 0 to 6000 V Constant current control (to be specified by the
Transfer bias DC bias 0 to 6500 V Constant current control (to be specified by the
Separation claw AC bias 690 V
bias
* Detected by the Environment Sensor (THU1)
2 Technology > Image Formation System > Overview > Parts Configuration
Developing High Pre-transfer
Voltage PCB
Charging PCB
(PCB12)
(PCB26)
Primary
Charging Wire
Developing
Cylinder
Dust Collecting Roller
Remarks
To be specified by the potential control
Fixed value (ON/OFF only)
Constant voltage control
Fixed value (ON/OFF only)
environment*)
environment*, paper type and print mode)
Fixed value (ON/OFF only)

■ Parts Configuration

● Entire Configuration
Transfer Assembly
Waste Toner
Feed Assembly
F-2-60
T-2-26
Toner Container
Toner Supply Assembly
2-45
Process
Assembly
Waste Toner
Container
F-2-61
2-45