Cleaning The Post-Separation Sensor 1/Post-Separation Sensor 2/Post-Separation Sensor - Canon F1 Service Manual

4
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Post-separation Sensor 1/Post-separation Sensor 2/Post-sep
Cleaning the Post-separation Sensor 1/Post-separation
Sensor 2/Post-separation Sensor 3
■ Procedure
1) Open the Feeder Cover [1].
[1]
2) Remove the Inner Cover [1].
• 3 Screws [2]
[2]
x3
4 Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Post-separation Sensor 1/Post-separation Sensor 2/Post-sep
F-4-132
[1]
F-4-133
Cleaning the Post-separation Sensor 1
3) Clean the Post-separation Sensor 1 [1] by blowing air a couple of times through the hole [A]
of the guide with a blower [2]. (When wiping it, be sure to use wet and tightly-wrung lint-free
paper.)
[A]
[1]
Cleaning the Post-separation Sensor 2
4) Clean the Post-separation Sensor 2 [1] by blowing air a couple of times through the hole [A]
of the guide with a blower [2]. (When wiping it, be sure to use wet and tightly-wrung lint-free
paper.)
4-50
[2]
F-4-134
[2]
[A]
[1]
F-4-135
4-50