Image Formation System; Overview; Specifications; Basic Specifications - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Image Formation System > Overview > Specifications

Image Formation System

Overview

■ Overview
Toner image is formed by the magnetic, 1-component toner projection developing method in
image formation system.
To ensure high quality print, this machine introduces the following new technologies:
• Small-diameter toner
High resolution by fine-grained toner
• Belt transfer method
Improved transfer/feeding performance by the belt feeding
• The shutter mechanism is added to the Primary Charging Assembly and the Pre-transfer
Charging Assembly.
This prevents discharge products from attaching on the Drum, thus prevents image failure
just after startup.
• Improved accessibility to the periodically replaced / durable parts provides increased
serviceability.
Primary Charging
Drum Cleaning Unit
Assembly
Photosensitive
Drum
2 Technology > Image Formation System > Overview > Specifications
Laser
Developping Assembly
Pre-transfer
Charging Assembly
Paper
ETB
F-2-59

■ Specifications

● Basic Specifications
Item
Photosensitive Drum Material
Drum diameter
Cleaning
Process speed
Separation method
Drum Heater
Drum HP detection
Developing Assembly Developing method
Developing Cylinder
Toner
Toner level detection
Primary charging Charging method
Cleaning
Shutter
Pre-transfer charging Charging method
Cleaning
Shutter
Transfer method
ETB Unit Material
Circumferential length
Cleaning
Transfer method
Separation method
Disengagement
mechanism
Waste Toner Capacity
Container
Full-level detection
Presence/absence
detection
Toner Container Method
Patch Sensor
Function/Method
A-Si
84 mm diameter
Cleaning Blade
iR-ADV 6075: 350 mm/sec
iR-ADV 6065/6055: 290 mm/sec
Curvature separation + separation claw
Yes (42 +/- 2 deg C)
Yes
Dry, 1-component toner projection method
iR-ADV 6075/6065/6055 series
1 cylinder (single-developing method)
24.5 mm diameter
Magnetic negative toner
Yes (magnetic sensor)
Corona charging (2 charging wires + grind wire)
Cleaning Pad (charging wire)
Yes
Corona charging (1 charging wire)
Cleaning Pad (charging wire)
Yes
Direct transfer (ETB: Electrostatic Transfer Belt)
CR rubber + urethane resin
298.5 mm
Brush Roller + Cleaning Blade
Transfer Roller (sponge roller)
Curvature separation + static eliminator
Yes
Equivalent to 1 million sheets
Yes
No
Set-on (manual)
No
2-44
T-2-25
2-44