How To Upgrade Firmware By Ftp (Remote Download) - NEC Univerge sv8500 Manual

4.4.4

How to Upgrade Firmware by FTP (Remote Download)

This firmware upgrade is performed up to eight Analog 2MCs at once.
Prepare the following:
- Firmware for upgrade
- PCs have to belong to the same segment with Analog 2MC.
- FTP server has to be installed in advance.
- PCPro has to be installed in advance.
- Analog 2MC is already registered to system and it is operating normally.
SYSTEM
PCPro
<Data Assignment on FTP Server>
Put the firmware file for upgrade in the root folder of FTP server, and then start the FTP server
STEP 1
program.
The following files have to be located in the root folder.
Note:
Contents of Firmware
SP3753-1400
EXAMPLE:
SP3753-1400
TFTP Server
(1) Make environment setting for TFTP
(2) Make environment setting for firmware upgrade
IP Network
SP3753
2amcmwlist.txt
Issue Number (ISSUE14)
Firmware Number
Analog 2MC (Analog Media Converter)
Firmware
(3) Download firmware via TFTP
Analog 2MC
Locate the files
in the root directory,
shown as in the right.
VOL.2-80
ON
PWR LINE -OPERATION- Tx/Rx LINK 100M
0 1
MC-2A MC-2A
root directory of FTP server
SP3753
2amcmwlist.txt