Configuration Command Assignment - NEC Univerge sv8500 Manual

4.3.4

Configuration Command Assignment

Assign the configuration data by command operation on maintenance console. For more information about pro-
cedure for the command operation, refer to
"DRS (Device Registration Server)" used in this section refers to the Telephony Server. The Telephony
Note:
Server acts as DRS for Analog 2MC using Proprietary Protocol.
There are two ways to set the network data;
• When DHCP server is used
• When DHCP server is NOT used
"4.4.5 How to Use Maintenance
VOL.2-63
Analog 2MC (Analog Media Converter)
Command".