NEC Univerge sv8500 Manual page 326

4.4.2 How to Back Up and Restore Config Data by TFTP Connection (Remote Download)
This config download/upload is performed via TFTP.
Prepare the following:
- PC that is capable of Telnet and TFTP features.
- All the PCs have to belong to the same segment with Analog 2MC.
- TFTP server has to be installed in advance.
- PCPro has to be installed in advance.
- Analog 2MC is already registered to system and it is operating normally.
• Backing Up Config Data via TFTP
(1) Make environment setting for TFTP
SYSTEM
PCPro
Telnet PC
Note 1: PCPro and Telnet both can be performed by single Personal Computer.
<Data Assignment on TFTP Server>
Create a folder to back up configuration data.
STEP 1
Start the TFTP server program.
STEP 2
Assign the folder as root folder, and then permit write and read behavior of this directory. For
STEP 3
more information, refer to the appropriate manual attached to the TFTP server program.
<Data Assignment on PCPro>
To search for the LENS of the target Analog 2MC, use the IPAN command.
STEP 4
TFTP Server
Configdata
(2) Make environment setting for Telnet
IP Network
Note 1
Note 1
VOL.2-73
Analog 2MC (Analog Media Converter)
(4) Copy a config file into TFTP Server via TFTP
ON
-OPERATION- Tx/Rx LINK 100M
PWR LINE
0 1
MC-2A MC-2A
Analog 2MC