Power On - NEC Univerge sv8500 Manual

4.3.3

Power ON

STEP 1: Turn ON the power switch (UP) on the rear panel of Analog 2MC.
STEP 2: Make sure the LED indicate normal status.
- PWR lamp lights green (*Boot program automatically starts)
REAR
RS-232C
Analog 1
Analog 0
ON
PWR LINE -OPERATION- Tx/Rx LINK 100M
0 1
MC-2A
PWR lamp
VOL.2-62
Analog 2MC (Analog Media Converter)
Turn ON the
power switch (UP)
POWER AC IN
Ether
Terminal Software
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required