NEC Univerge sv8500 Manual page 329

Log in to the target Analog 2MC by entering userID and password, which are set in the AUTD
STEP 8
command.
After a prompt (->) is displayed, enter "usrConsole".
STEP 9
After a prompt (2A-MC>) is displayed, enter "get configdata <TFTP's IP Ad-
STEP 10
dress>" to download configuration data into Analog 2MC.
Confirm that "successfully completed" is displayed in the command prompt, indicating the
STEP 11
upload to TFTP server is completed normally.
To reflect the configuration data that is downloaded from TFTP server, save it by entering
STEP 12
"save config" and reboot Analog 2MC by entering "reboot".
Exit the HyperTerminal by selecting [File] -> [Exit].
STEP 13
<Confirmation of Analog 2MC>
Confirm that Analog 2MC is normally registered in system after reboot. Use the DISD/FPTS
STEP 14
commands. For more information, refer to the Command Manual.
Check that calls via Analog 2MC can be made.
STEP 15
Analog 2MC (Analog Media Converter)
VOL.2-76