Confirm that "successfully completed" is displayed in the screen, indicating the upload to
STEP 11
TFTP server is completed normally.
To reflect the configuration data that is downloaded from TFTP server, save it by entering
STEP 12
"save config" and reboot Analog 2MC by entering "reboot".
Exit the HyperTerminal by selecting [File] -> [Exit].
STEP 13
<Confirmation of Analog 2MC>
Connect the Analog 2MC to the network.
STEP 14
Confirm that Analog 2MC is normally registered in system after reboot. Use the DISD/FPTS
STEP 15
commands in PCPro. For more information, refer to the Command Manual.
Check that calls via Analog 2MC can be made.
STEP 16
Analog 2MC (Analog Media Converter)
VOL.2-72