Save Measurement Settings And Results; Save Files - Keysight N9912A User Manual

File Management
The FieldFox can save any of the following types of files:
 Current settings and calibration
 Trace data (*csv and *.S1P)
 Picture of the FieldFox screen
In addition, files can be saved to the internal memory, a USB Flash drive, or a
microSD card.
In this Chapter
Save Files ............................................................ 162
Recall Files .......................................................... 164
Set File Type and Device ................................... 164
Manage Files ...................................................... 166
Manage Folders ................................................. 166
Edit Keywords ..................................................... 167
Prefixes for Filenames ........................................ 168
Printing ................................................................ 168
See Also
Erase User Data .................................................. 183
Saving and Recalling Files
NOTE FieldFox State files are intended to be recalled on the same instrument model on
which they were saved. Sometimes you may able to recall them within model
families. An error will result when trying to recall a state file that was saved on a
different model family.
 The FieldFox model families are:
 N991x (VNA/SA) model family
 N992x (VNA) model family
 N993x (SA) model family

Save Files

How to Save a File
 Press Save/Recall 9.
 Then Save.
 At the top of the current 'labeler' screen (see following image) check the File Type
 Then use the labeler to specify a filename.
NOTE Insert only ONE USB Flash Drive in the FieldFox when saving or copying files.
162
to save and Device (Internal, USB, Storage Card) to which the file is saved. Learn
how to change these settings on page 164.
FieldFox User's Guide