Mode/Meas/View Dialog - Keysight X-Series User Reference

Signal analyzers 5g nr mode

Hide thumbs Also See for X-Series:

2 User Interface

2.1 Screen Tabs

This results in the analyzer being placed in the EMI Receiver Mode, running the APD

measurement, in order to emulate the ESU APD Mode.

:INSTrument[:SELect] APDistribution

Remote Command

IF Mode compatibility command for EMC (Remote Command only)

Provided for ESU compatibility. When this command is received, the analyzer

aliases it to the following:

:INST:SEL EMI

This results in the analyzer being placed in the EMI Receiver Mode, running the

Monitor Spectrum measurement, in order to emulate the ESU IF Mode.

:INSTrument[:SELect] IFANalyzer

Remote Command

2.1.1.3 Measurement

The Measurement column of the Mode/Meas/View dialog shows all the

Measurements available for the Mode which is selected in the first column. Select a

Measurement in the second column and the View column will show all the Views

available for that measurement. Once you have the Mode, Measurement and View

selected, press OK to change the current Screen to that Mode, Measurement and

2.1.1.4 View

A View is a collection of Result Windows. The View column of the

"Mode/Meas/View Dialog" on page 116

Measurement which is selected in the second column. Once you have the Mode,

Measurement and View selected, press OK to change the current Screen to that

Mode, Measurement and View.

The View may also be set by using the View tab on the Display menu. The View tab

is the last tab on the Display menu for every measurement. The Views are the same

as those listed in the

shows all the Views available for the

"Mode/Meas/View Dialog" on page

5G NR Mode User's & Programmer's Reference