The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
show ip bgp ipv6 unicast filter-list
View the routes that match the filter lists.
Z9500
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
show ip bgp ipv6 unicast flap-statistics
View flap statistics on BGP routes.
Z9500
Syntax
show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-
length] [filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
filter-list as-
path-name
regexp regular-
expression
572
Enter the name of an AS-PATH.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
(OPTIONAL) Enter the keywords filter-list followed by
the name of a configured AS-PATH ACL.
Enter a regular expression then use one or a combination of
the following characters to match:
•
. = (period) any single character (including a white
space).
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Border Gateway Protocol