Related
ipv6 prefix-list
Commands
show ip bgp ipv6 unicast
View the current BGP routing table.
Z9500
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Parameters
network
network-mask
longer-prefixes
Command
•
Modes
•
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
When you enable the bgp non-deterministic-med command, the show ip
Information
bgp command output for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specific cluster.
Z9500
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Parameters
cluster-id
Command
•
Modes
•
568
— configures an IPv6 prefix-list.
(OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
(OPTIONAL) Enter the network mask (in slash prefix format)
of the BGP network address.
(OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
(OPTIONAL) Enter the cluster id in dotted decimal format.
EXEC
EXEC Privilege
Border Gateway Protocol