Show Run Iscsi - Dell C9000 Series Reference Manual

Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.53 33432
Related
Commands

show run iscsi

Display all globally configured non-default iSCSI settings in the current Dell Networking OS session.
C9000 Series
Syntax
show run iscsi
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.6(0.0)
Related
Commands
Initiator Target
• show iscsi— displays the currently configured iSCSI settings.
• show iscsi session— displays information about active iSCSI sessions on the
switch.
• show run iscsi — shows run iscsi.
Description
Introduced on the C9010.
Introduced on the Z9500.
• show iscsi— displays the currently configured iSCSI settings.
• show iscsi session— displays detailed information about active iSCSI sessions on
the switch.
• show iscsi session detailed— displays detailed information on active iSCSI sessions
on the switch.
Target
IP Address TCPPort ID
10.10.0.101 3260
Connection
0
iSCSI Optimization 1307