Show Config - Dell Z9500 Command Reference Manual

Version
7.5.1.0
Related
•
Commands
•

show config

View the current ROUTER BGP configuration.
Z9500
Syntax
show config
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
Example
Dell(conf-router_bgp)#show conf
!
router bgp 18508
!
Dell#
Border Gateway Protocol
Description
Introduced
capture bgp-pdu neighbor
clear ip bgp – specifies a size for the capture buffer.
Description
Introduced on the Z9500.
neighbor RR-CLIENT peer-group
neighbor RR-CLIENT remote-as 18508
neighbor RR-CLIENT no shutdown
neighbor RR-CLIENT-PASSIV peer-group passive
neighbor RR-CLIENT-PASSIV remote-as 18508
neighbor RR-CLIENT-PASSIV subnet 9000::9:0/120
neighbor RR-CLIENT-PASSIV no shutdown
neighbor 1109::33 remote-as 18508
neighbor 1109::33 update-source Loopback 101
neighbor 1109::33 no shutdown
neighbor 2222::220 remote-as 18508
neighbor 2222::220 route-reflector-client
neighbor 2222::220 update-source Loopback 100
neighbor 2222::220 no shutdown
neighbor 4000::33 remote-as 18508
neighbor 4000::33 no shutdown
neighbor 4000::60 remote-as 18508
neighbor 4000::60 no shutdown
neighbor 9000::1:2 remote-as 640
no neighbor 9000::1:2 activate
neighbor 9000::1:2 no shutdown
– enables capture of an IPv6 BGP neighbor packet.
563