Example
The following example configures TCP Port 49154 to target IP address
172.16.1.20.
console(config)#iscsi target port 49154 address 172.16.1.20
show iscsi
Use the show iscsi command in Privileged EXEC mode to display the iSCSI
configuration.
Syntax
show iscsi
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the iSCSI configuration.
console#show iscsi
iSCSI enabled
iSCSI CoS enabled
iSCSI vpt is 5
Session aging time: 10 min
Maximum number of sessions is 192
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port
Target IP Address
Name
860 --
3260 --
30001 172.16.1.1iqn.1993-11.com.disk-vendor:diskarrays.sn.45678.tape:sys1.xyz
30033172.16.1.10
576
iSCSI Optimization Commands