Virtual Lan (Vlan) Commands; Description - Dell Force10 Z9000 Reference Manual

Ftos command line reference guide for the z9000 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 Z9000:

Table of Contents

FTOS#show mac learning-limit

FTOS#show mac learning-limit interface gig 5/84

FTOS#show mac learning-limit interface gig 5/84 vlan 2

Example (C/S-

FTOS#show mac learning-limit

FTOS#show mac learning-limit interface gig 1/0

Virtual LAN (VLAN) Commands

The following commands configure and monitor virtual LANs (VLANs). VLANs are a virtual interface and use many of the

same commands as physical interfaces.

You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs and

SNMP are not supported on a VLAN.

Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a VLAN interface may

continually switch between Master and Backup.

NOTE: For more information, refer to

Add a description about the selected VLAN.

C-Series, E-Series, S-Series

description description

VLAN Stacking

and VLAN-related commands, such as

Enter a text string description to identify the VLAN (80 characters

portmode hybrid