V a n i t y M i r r o r L i g h t T e s t
1. Open the sunvisor.
2. Remove the sunvisor (see step 2 on page 20-56).
3. Disconnect the 2P connector (A) f r o m the vanity
mirror light.
Vanity mirror light:
1 . 1 W
4. Check for continuity between the No. 1 and No. 2
terminals.
• W i t h the vanity mirror cover (B) opened, there
should be continuity.
• W i t h the vanity m i r r o r cover closed, there should
be no continuity.
5. If the continuity is not as specified, replace the bulb
(C) or the sunvisor.
C o u r t e s y L i g h t R e p l a c e m e n t
1. Carefully pry off the lens (A) w i t h a small
screwdriver.
Courtesy light:
3.8 W
2. Remove the bulb (B) f r o m the socket.
22-191