Honda ACCORD HYBRID 2005 Service Manual page 1921

DTC B1156: Gauge Control Module Lost
Communication (Wiper Switch Message)
with the Combination Switch Control Unit
1. Clear the DTCs using the HDS.
2. Cycle the ignition switch to OFF and then back O N .
3. Check for DTCs by selecting the DTCs MENU
(DTCs) f r o m the HDS.
Is DTC B1156 indicated?
Y E S — G o t o step 4.
IMO—Intermittent failure. The gauge control system
is OK at this time. Check pinfits and connections. •
4. Check for DTCs by selecting the DTCs MENU
(DTCs) of the HDS.
Are DTCs B1009 or B1063 also indicated?
YES—Go to Combination Switch Control Unit Input
Test (see page 22-122). •
N O — G o to Gauge Control M o d u l e Input Test
(see page 22-119). •
22-239