Honda ACCORD HYBRID 2005 Service Manual page 1815

• BODY •
D o o r K e y C y l i n d e r S w i t c h T e s t
Rear Door
1. Remove the left or right rear door panel (see page
20-15).
2. Disconnect the 3P connector f r o m the actuator.
Not used
3. Check for continuity between the terminals.
There should be continuity between the No. 1 and
No. 3 terminals w h e n the door lock knob switch is
UNLOCK position and no continuity w h e n the
switch is in the LOCK position.
4. If the continuity is not as specified, replace the door
lock actuator.
1. Remove the driver's door panel (see page 20-7).
2. Disconnect the 3P connector f r o m the key cylinder
switch.
3. Check for continuity between the terminals.
• There should be continuity between the No. 2
and No. 3 terminals w h e n the door key cylinder
switch is in LOCK position.
• There should be no continuity between the No. 2
and No. 3 terminals w h e n the door key cylinder
switch is in the neutral or UNLOCK position.
• There should be continuity between the No. 1
and No. 2 terminals w h e n the door key cylinder
switch is in UNLOCK position.
• There should be no continuity between the No. 1
and No. 2 terminals w h e n the door key cylinder
switch is in the neutral or LOCK position.
4. If the continuity is not as specified, replace the door
key cylinder assembly (see page 20-9).
22-133