Honda ACCORD HYBRID 2005 Service Manual page 1829

• BODY •
T r u n k L i d O p e n e r S o l e n o i d T e s t
T r u n k K e y C y l i n d e r S w i t c h T e s t
1. Disconnect the 3P connector f r o m the trunk latch
switch/trunk lid opener solenoid.
Check trunk lid opener solenoid operation by
connecting power and g r o u n d according to the
table. To prevent damage to the trunk lid opener
solenoid, apply battery voltage only m o m e n t a r i l y .
\ ^ Terminal
Position \
1 2
U N L O C K
e
0
3. If the trunk lid opener solenoid does not w o r k as
specified, replace it.
1. Remove the trunk lid t r i m (see page 20-55).
2. Disconnect the 3P connector f r o m the key cylinder
switch.
3. Check for continuity between the terminals.
There should be continuity between the No. 2 and
No. 3 terminals w h e n the trunk key cylinder switch
is in UNLOCK position. There should be no
continuity between the No. 2 and No. 3 terminals
w h e n the trunk key cylinder switch is in the
released (neutral) position.
4. If the continuity is not as specified, replace the
trunk key cylinder switch.
22-147